B4512 Control Panels
- Supports up to 28 points using a combination of hardwired or wireless points for installation flexibility and 2 areas with perimeter and interior control
- On-board Ethernet port for Conettix IP alarm communication and remote programming, compatible with modern IP networks including IPv6/IPv4, Auto-IP, and Universal Plug and Play
- Installer-friendly features for simple installation and communications, including on-board USB for easy on-site RPS programming, plus support for Remote Connect Service (not available in Europe, the Middle East, or Africa), and plug-in PSTN and cellular communication modules for simple installation and communications
- Remote Security Control (RSC) app which allows users to control their security systems - and view system cameras - remotely from mobile devices such as phones and tablets
- Programmable keypad shortcuts, situation sensitive on-screen help, and a bilingual user interface make system operation simple and easy
The B4512 Control Panel integrates intrusion and residential fire, providing one simple user interface for both systems. The B4512 provides up to 28 individually identified points that can be split into 2 areas. The control panel can communicate through its built-in Ethernet port (not applicable to “E” control panels), or through compatible plug-in modules that can send events over the public switched telephone network (PSTN) or over cellular network communications.
| Ethernet | 10/100 full duplex (N/A for “E” control panels) |
| Relative humidity | 5% to 93% at +90°F (+32°C), non-condensing |
| Temperature (operating) | +32°F to +122°F (0°C to +49°C) |
| Areas | 2 |
| Custom functions | 2 |
| Events | Up to 127 |
| Passcode users | 32, plus 1 Installer passcode |
| Points | 28 (8 on-board, up to 20 off-board and virtual) |
| Programmable outputs | 27 (3 on-board, up to 24 off-board and virtual) |
| RF points | 20 |
| IP cameras | 2 |
| SKEDs | 5 |
| Current draw (maximum) | Idle 125 mA; Alarm 155 mA |
| Output (alarm) | 1.3 A at 12 VDC |
| Output (auxiliary, continuous power, and switched auxiliary combined): | 800 mA at 12 VDC nominal |
| Voltage (operating): | 12 VDC nominal |
| Voltage (AC): | CX4010 UL Listed Class 2 Transformer 18 VAC 22 VA 60 HZ |