A full range of MIC Series power supply units (PSUs), with integrated Bosch IP technology and built-in support for NTCIP protocol, provides all connections for power, telemetry and video for MIC Series MIC550, MIC550IR, and MIC612 cameras. These MIC IP PSUs ensure that the cameras can be installed in a variety of locations, including low voltage and mobile applications. They conform to the National Transportation Communications for ITS Protocol (NTCIP) specification. NTCIP conformance ensures that the MIC IP PSU integrates with transportation management devices.
| |
| MIC Camera models |
MIC IP PSU (Non-IR models) , MIC IP PSU (IR models) |
| MIC550 |
X |
| MIC550 IR |
X |
| MIC612 |
X |
| |
|
| Model |
Voltage / Power @ 50/60 Hz , Applicable Cameras |
| Non-IR IP Power Supply Units |
|
| MIC-IP-PS-24 |
Input: 24 VAC ± 10%Consumption: 2.0 A , MIC550, MIC612 |
| MIC-IP-PS-115 |
Input: 115 VAC ± 10%Consumption: 400 mA |
| MIC-IP-PS-230 |
Input: 230 VAC ± 10%Consumption: 200 mA |
| IR IP Power Supply Units |
|
| MIC-IPIR-PS-24 |
Input: 24 VAC ± 10%Consumption: 3.3 A , MIC550IR |
| MIC-IPIR-PS-115 |
Input: 115 VAC ± 10%Consumption: 750 mA |
| MIC-IPIR-PS-230 |
Input: 230 VAC± 10% Consumption: 350 mA |
| |
| Dimensions (L x W x H) |
330 mm x 250 mm x 90.75 mm(13 in. x 9.84 in. 3.57x in.) |
| Form Factor (four screw holes) |
11.19 mm (0.44 in.) |
| Weight |
Non-IR PSUs: 7.21 kg (15.9 lb)IR PSUs: 7.3 kg (16.1 lb) |
| Material |
Powder-coated cast aluminum, rated IP67 |
| Color |
RAL 9010 (Pure White) with sand finish |
| Optional add-ons(each sold separately) |
MIC-ALM (8-input alarm card)MIC-WKT (washer kit used with optional washer pump, purchased separately)MIC-WKT-IR (washer kit, with integrated four-input alarm terminal for IR models, used with optional washer pump, purchased separately)VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit |
| |
|
| Alarm Inputs/Outputs |
|
| IP Encoder Video Input(all models) |
Supports 1 video input- Recommended in order to use the switched video output for MIC thermal cameras. |
| - Non-IR, without expansion card |
Supports 1 tamper input. |
| - Non-IR, with expansion card |
Supports 8 inputs, 2 outputs. |
| - IR models |
Supports 4 inputs. |
| |
|
| Operating Temperature |
Non-IR models: -40 °C to +60 °C(-40 °F to +140 °F) IR models: -40 °C to +50 °C(-40 °F to +122 °F) |
| Storage Temperature |
-40 °C to +65 °C (-40 °F to +149 °F) |
| Cold Start |
-30 °C(Requires 30-minute warm-up period after applying power before operation.) |
| |
|
| Camera Setup/Control |
Via Internet Explorer Web browser version 7.0 or later or BVMS |
| Software Update |
Firmware upload |
| |
|
| Storage |
One (1) SD card slot (for an SD or an SDHC card, user-supplied) with card capacity up to 32 GB |
| Standards |
H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG |
| Streaming |
A total of four (4) independent streams: Two (2) individually configurable H.264 streams at 4CIF/D1 resolution, One (1) H.264, I-frame only stream (suitable for recording) One (1) M‑JPEG stream at 4CIF/D1 resolution |
| GOP Structure |
IP, IBP, IBBP |
| Data Rate |
9.6 kbps to 6 Mbps |
| Overall IP Delay |
240 ms |
| Resolution (Horizontal x Vertical, PAL/NTSC) |
|
| - 4CIF/D1 |
704 x 576/480 (50/60 ips)Depending on picture content and movement |
| - CIF |
352 x 288/240 (50/60 ips4) |
| Ethernet |
10-Base T/100 Base-TX, auto-sensing, half/full duplex, RJ45 |
| Protocols |
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP v3, RTSP, 802.1x, iSCSI, DynDNS, UPnP, IP v4/6, QoS, SSH, SSL |
| Encryption |
TLS 1.0, SSL, AES (license option) |
| NTCIP Protocols |
|
| - CCTV Camera Control |
NTCIP 1205 |
| - Application Layer |
SNMP per NTCIP 1101:1996 & NTCIP 2301 |
| - Transport/Network Layers |
TCP/IP per NTCIP 2202:2001 |
| - Sub-network Layer |
PMPP (Point to Multi-Point Protocol) per NTCIP 2101:2001 & NTCIP 2102:2003 |
| Audio |
1 x 3.5mm stereo socket |
| - Standard |
G.711, 8 kHz sampling rateL16, 16 kHz sampling rate |
| - Signal-to-Noise Ratio |
>50 dB |
| - Audio Streaming |
Full Duplex / Half Duplex |
| |
|
| Description |
Fiber Optic Ethernet Media Converter kit (sold separately and user-installed inside the power supply enclosure)See the datasheet for the VG4‑SFPSCKT Fiber Optic Ethernet Media Converter Kit for technical specifications and other product details. |
| Data Interface |
Ethernet |
| Data Rate |
10/100 MbpsIEEE 802.3 CompliantFull Duplex or Half Duplex Electrical PortFull Duplex Optical Port |
| Compatible Receiver |
CNFE2MC |
